1975 Roosevelt dime obverse and reverse showing FDR portrait and torch design

The 1975 Dime Value Guide: From 10¢ to $506,250

One 1975 Roosevelt dime sold for $506,250 at GreatCollections in October 2024 — a new world record. Most circulated 1975 dimes are worth face value, but knowing exactly which variety, mint mark, and strike quality you have makes all the difference. Use the free tools below to find out what yours is worth.

★★★★★  4.8 / 5 · Trusted by 1,347 collectors
Check My 1975 Dime Value →
$506,250 All-time auction record (No-S Proof, 2024)
2 Known examples of the 1975 No-S Proof dime
899M+ Total 1975 dimes minted (P + D combined)
$2,000+ MS67 Full Bands Philadelphia dime value

Free 1975 Dime Value Calculator

Select your coin's mint mark, condition, and any known errors below. The calculator uses real auction data from PCGS, Heritage Auctions, and GreatCollections.

Step 1 — Mint Mark
Step 2 — Condition
Step 3 — Known Errors / Varieties (check all that apply)

If you're not sure what mint mark or condition your coin has, there's a 1975 Dime Coin Value Checker for beginners that lets you upload a photo and get an instant AI-powered estimate without needing to know the technical details first.

Describe Your 1975 Dime for a Detailed Assessment

Type a plain-English description of your coin below. Our analyzer scans for key 1975 dime characteristics and returns a tailored assessment.

Mention these things if you can
  • Mint mark (D, S, or none)
  • Surface finish (shiny/mirror-like vs dull)
  • Torch band separation
  • Any visible doubling on lettering
  • Whether it came from a proof set
Also helpful
  • Visible wear on Roosevelt's cheek
  • Any off-center or misaligned strike
  • Weight or size abnormalities
  • Color toning (golden, rainbow, etc.)
  • PCGS / NGC slab grade if certified

Skipped the calculator?

Jump back up and enter your mint mark, condition, and errors for an instant value estimate — takes under 30 seconds.

Use the Free Calculator →

🔍 1975 No-S Proof Dime Self-Checker

The 1975 No-S Proof is the most valuable modern U.S. coin, with only two examples confirmed. Use this checker to determine whether your proof dime could be one of them.

Side-by-side comparison: 1975-S proof dime with S mint mark vs 1975 No-S proof dime with empty mint mark location

Common: 1975-S Proof Dime

The standard proof. Has a clear, distinct "S" mint mark just above the date on the obverse. Mirror-like reflective fields with frosted raised design. Worth $3–$15 in typical proof grades, up to ~$125 in PR70 DCAM.

— vs —

⚠️ Rare: 1975 No-S Proof Dime

No mint mark at all in the "S" position above the date. Identical proof quality — mirror fields, frosted devices, squared rims. Only 2 confirmed examples exist. Most recently sold for $506,250. Would be found inside an original 1975 proof set.

4-Point No-S Verification Checklist

1975 Dime Value Chart at a Glance

Values below reflect current market conditions based on PCGS, Heritage Auctions, and GreatCollections data. For a complete step-by-step illustrated 1975 dime identification breakdown with grading photos, visit the linked reference guide. Highlighted row (gold) = No-S Proof (signature variety); orange = MS67 Full Bands.

Variety Worn / Circ. AU MS / Proof 60–65 Gem MS / PR 66–67+
1975-P (No Mark) $0.10 – $0.20 $0.50 – $1 $3 – $28 $40 – $250
1975-P Full Bands (FB) $0.20 – $0.50 $1 – $2 $10 – $60 $150 – $2,000+
1975-D $0.10 – $0.20 $0.50 – $1 $3 – $7 $30 – $100
1975-D Full Bands (FB) $0.20 – $0.50 $1 – $2 $5 – $30 $100 – $500+
1975-S Proof DCAM — Proof only — — Proof only — $3 – $15 $15 – $125
1975-S/S RPM FS-501 — Proof only — — Proof only — $50 – $200 $225 – $881+
1975 No-S Proof ⭐ — Proof only — — Proof only — $138,300+ $349,600 – $506,250

📱 CoinHix lets you scan your 1975 dime with your phone camera and instantly cross-check its grade and value against current market comps — a coin identifier and value app.

The Valuable 1975 Dime Errors — Complete Guide

The 1975 Roosevelt dime series includes several documented error varieties that dramatically increase value beyond face value. The spectrum ranges from broadly affordable doubled die varieties to the world-record 1975 No-S Proof. Each card below details what makes the variety notable, how to identify it, and what real examples have sold for.

MOST FAMOUS $349,600 – $506,250
1975 No-S Proof dime showing blank mint mark area above the date where the S should appear

1975 No-S Proof Roosevelt Dime

The 1975 No-S Proof is the single most famous modern United States coin rarity. The error occurred during die preparation at the San Francisco Mint when one obverse die was submitted for production without receiving the standard "S" mint mark punch. Because this was an isolated die error rather than a batch oversight, only a minuscule number of coins escaped before the mistake was caught.

Visually, the coin is indistinguishable from a normal 1975-S proof except for one detail: the "S" mint mark is completely absent above the date on the obverse. The proof finish is fully present — mirror-like fields, frosted devices, sharp squared rims — because the coins were struck on standard proof planchets with the correct striking pressure and polishing process.

Only two examples are confirmed to exist. The coin holds the #1 ranking in every edition of 100 Greatest U.S. Modern Coins by Garrett and Schechter. The "Ruth E. Discovery Coin," graded PCGS Proof-67 with CAC approval, sold for $506,250 at GreatCollections on October 27, 2024, setting a new all-time world record. The other example, graded PCGS PR68, sold for $456,000 at Heritage Auctions in 2019.

How to spot it Use a 10× loupe to examine the area just above "1975" on the obverse. The "S" position should be completely blank with no impressed letter, ghost impression, or die polish artifact. The coin must simultaneously show full proof-quality mirror fields and frosted devices.
Mint mark Struck at San Francisco Mint on proof dies — but no "S" mark was punched onto the obverse die before production.
Notable PCGS #5254. Two known examples confirmed — one graded PCGS PR67 (CAC), one PCGS PR68. The PR68 example is listed in the PCGS Condition Census position #1 and is among only six "No-S" proof dime varieties spanning 1968–1983. World record price: $506,250 (GreatCollections, October 2024).
BEST FOR PROOF COLLECTORS $225 – $881+
1975-S/S RPM FS-501 proof dime showing doubled overlapping S mint mark impressions under magnification

1975-S/S Repunched Mint Mark (RPM) FS-501

The 1975-S/S Repunched Mint Mark variety resulted from a documented quirk of the hand-punching process used at the San Francisco Mint before mint marks were hubbed directly into master dies. A worker applied the "S" punch to the working die twice, with the second impression landing at a slightly different position or angle than the first.

Under a 5× to 10× loupe, two distinct "S" impressions are visible — the primary mark and an offset secondary mark that may appear shifted north, south, or at a rotational angle relative to the first. The variety is catalogued as FS-501 by CONECA (Combined Organizations of Numismatic Error Collectors of America), making it an officially recognized diagnostic variety for attribution purposes.

Because these coins were produced for proof sets, surviving examples retain their original proof surfaces with mirror fields and frosted devices. Values rise steeply with grade: a PR69 example sold for $881 at Heritage Auctions in September 2016, while PR68 pieces have realized around $225. Attributed examples in PR67 are priced in the $150–$300 range, making this variety an affordable entry point for collectors interested in 1975 proof errors.

How to spot it Inspect the "S" mint mark above the date under 10× magnification with a strong raking side-light. Look for a secondary "S" impression partially visible at a different vertical or rotational position — the doubling appears as a serif or leg of a second "S" jutting from the primary mark.
Mint mark San Francisco (S) proof coin only. RPM affects proof strikes exclusively since business-strike dimes from 1975 were produced only at Philadelphia and Denver.
Notable Designated FS-501 by CONECA. A PR69 example realized $881 at Heritage Auctions, September 2016. A PR68 example sold for $225 at Eagle Auctions in July 2020. Attribution is required for premium pricing — submit to PCGS or NGC for variety designation.
MOST ACCESSIBLE ERROR $25 – $300+
1975 Roosevelt dime doubled die error showing visible doubling on the LIBERTY lettering or date

1975 Dime Doubled Die Obverse (DDO) / Reverse (DDR)

Doubled die errors occur when the working die receives a misaligned or offset impression during the hubbing process — the mechanical step in which a hardened hub transfers the design to the softer die steel. If the hub and die shift slightly between the first and second hubbing pass, the design becomes doubled on the finished die, and every coin struck from it will carry the doubling.

On 1975 Roosevelt dimes, doubling has been documented on the obverse (DDO) — most visible on the lettering "LIBERTY," "IN GOD WE TRUST," and the date numerals — and on the reverse (DDR), where the torch flame tips, horizontal bands, and the inscription "ONE DIME" can show doubling under magnification. Class IV and Class VI hub doubling types appear most frequently on clad-era coins, manifesting as a slight spread or notching of letters rather than dramatic mechanical doubling.

Values depend heavily on the strength and location of the doubling. A minor hub doubling showing slight spread on circulated examples may carry only a modest premium over face value. A strongly doubled variety in MS65 or better condition — particularly if the doubling is visible without magnification — commands $100 to $300 or more. Any suspected strong DDO should be attributed by PCGS or NGC for maximum market value.

How to spot it Examine "LIBERTY," "IN GOD WE TRUST," and the date numerals under a 10× loupe. Look for distinct secondary impressions of letters or digits — not die deterioration doubling (which looks fuzzy), but crisp, offset secondary letter outlines with a defined gap between the two impressions.
Mint mark Documented on both Philadelphia (no mark) and Denver (D) business-strike issues. Proof versions from San Francisco can also exhibit DDO but are less commonly traded.
Notable Strong doubled die obverse examples on clad Roosevelt dimes from this era typically sell in the $50–$300 range depending on grade and doubling severity. Submit strongly doubled examples to PCGS for CONECA attribution and variety number designation to maximize resale value.
STRIKING VISUAL IMPACT $30 – $200+
1975 Roosevelt dime off-center strike error showing the design shifted from center with blank planchet visible

1975 Dime Off-Center Strike

An off-center strike happens when a planchet (blank coin) enters the coining chamber misaligned relative to the die, so only part of the design is impressed onto the metal. The result is a coin with the Roosevelt portrait and reverse design shifted to one side, while a crescent-shaped area of blank, unstruck metal is visible along the opposite edge.

Off-center strikes are classified by the percentage of the design that is missing. A 5% off-center is barely noticeable; a 50% off-center shows roughly half the design with a large blank crescent. Collectors generally prefer off-center strikes in the 20%–50% range where the shift is dramatic but the date is still visible — a full date significantly boosts value on these error coins. A coin shifted so far that the date disappears is worth considerably less.

Premium increases with the degree of misalignment and whether the date remains legible. Modestly off-center 1975 dimes (10%–20%) in uncirculated condition can sell for $30–$75; dramatically struck examples at 40%–50% with the full date visible can reach $150–$200 or more in gem condition. The dramatic visual presentation makes off-center dimes popular with beginning error collectors looking for an affordable, eye-catching piece.

How to spot it Look at the coin under normal light from directly above. One side of the coin will show the reeded edge merging into a flat, unstruck blank area with no design. The opposing side will show normal struck design. Measure the approximate percentage of blank area — coins over 15% off-center are considered collectible.
Mint mark Can occur at Philadelphia (no mark) or Denver (D). Off-center proof strikes from San Francisco are extremely unusual and would command a substantial premium.
Notable Value increases sharply when the date "1975" remains fully visible despite the misalignment — this is the key premium factor buyers check first. Examples with date visible and 30%+ off-center in MS63 or better have sold in the $100–$200 range at major online coin venues.
RAREST STRIKE ERROR $200 – $1,500+
1975 Roosevelt dime wrong planchet error showing size or metal difference compared to a standard dime planchet

1975 Dime Wrong Planchet Error

A wrong planchet error occurs when a blank intended for a different denomination (or even a foreign coin) makes its way into the dime press and gets struck with dime dies. Because the planchet is the wrong size, weight, or metal composition, the resulting coin carries the Roosevelt dime design on a distinctly incorrect substrate — a mismatch immediately apparent upon close examination.

The most documented wrong-planchet pairings for 1975 dimes involve cent planchets (smaller diameter, copper-zinc alloy with a distinctly reddish color), quarter planchets (larger diameter, causing the design to appear undersized in the center), and occasionally foreign coin planchets of similar size. On a cent-planchet error, the reddish copper color is obvious even to a non-specialist. Quarter-planchet strikes are thinner-looking and larger than a dime's 17.9mm diameter.

Wrong planchet errors are among the most visually dramatic and hardest to fake of all U.S. mint errors — the weight discrepancy alone is detectable with a precise scale. A 1975 dime struck on a cent planchet weighs approximately 2.5 grams rather than the standard 2.27 grams and will register as copper-alloy on a simple acid test. Values range from a few hundred dollars for minor wrong-planchet errors to well over $1,000 for dramatic large-planchet or foreign-planchet strikes in high grades.

How to spot it Weigh the coin precisely on a digital scale accurate to 0.01 grams. A standard 1975 clad dime weighs 2.27 grams. Any significant deviation — above 2.5g or below 2.0g — warrants further investigation. Check color (copper = cent planchet), diameter with calipers, and edge characteristics (smooth edge vs reeded).
Mint mark Can occur at Philadelphia (no mark) or Denver (D) business-strike production facilities where multiple denominations share adjacent presses. Proof-facility wrong planchet errors are exceptionally uncommon.
Notable Wrong planchet errors require PCGS or NGC authentication — no premium is recognized without third-party certification. Values vary widely based on the planchet type: cent-planchet dimes typically realize $200–$600; quarter-planchet dimes can bring $500–$1,500+. Each piece is essentially unique, so comparison to similar errors is the best pricing guide.

Found one of these errors on your coin?

Use the free calculator above to get a quick value estimate — select your mint mark, condition, and check the matching error box.

Get My Error Coin Estimate →

1975 Dime Mintage & Survival Data

Group of 1975 Roosevelt dimes including Philadelphia, Denver, and San Francisco proof examples showing all three mint varieties
Mint Mint Mark Type Mintage Notes
Philadelphia None (no mark) Business Strike 585,673,900 P mark not added to dimes until 1980
Denver D Business Strike 313,705,300 D mark above date on obverse
San Francisco S Proof (DCAM) 2,845,450 Sold in 1975 Proof Sets at $7.00 each
San Francisco None (error) Proof (No-S Error) 2 known Most valuable modern U.S. coin; PCGS-certified
Combined Business Strike Total 899,379,200 Philadelphia + Denver combined
Composition specs: 1975 Roosevelt dimes are copper-nickel clad — 75% copper and 25% nickel outer layers bonded over a pure copper core. Weight: 2.27 grams. Diameter: 17.90mm. Edge: reeded. Designer: John R. Sinnock (obverse portrait) / same for reverse. The coin contains no precious metal; its melt value is approximately equal to face value.

How to Grade Your 1975 Roosevelt Dime

Grading strip showing four 1975 Roosevelt dimes representing worn, circulated, about uncirculated, and gem mint state condition tiers

🔴 Worn (Good – Fine, G–F)

Significant wear on Roosevelt's cheekbone, jaw, and hair detail above the ear. Torch flame tips are flat and merged. Rim may be worn into lettering. Most 1975 dimes found in pocket change fall here. Value: face value to $0.25.

🟡 Circulated (VF – AU, VF20–AU58)

Some wear on Roosevelt's cheek and hair above ear; major design details intact. Torch bands show some flatness but vertical lines visible. Luster begins to show in recesses at AU. Value: $0.20 to $1.00 depending on grade.

🟢 Uncirculated (MS60–MS65)

No wear anywhere. Original mint luster covers the entire coin, though lower MS grades may show bag marks or contact marks on flat areas. Torch bands may or may not be fully separated. Value: $3–$28 standard; $10–$60 with Full Bands.

💎 Gem (MS66–MS67+)

Near-perfect surfaces with minimal marks. Strong luster, sharp strike details. At MS67, coins become genuinely scarce. Full Bands at this level commands serious premiums. MS67 without FB: $200–$880. MS67 with FB: $500–$2,000+.

Pro tip — Full Bands designation: Before submitting any 1975 dime for PCGS or NGC grading, check the reverse torch under 5× magnification. The three horizontal bands crossing the torch shaft must be fully separated with no bridging metal. If they are fully defined, the coin is eligible for the FB designation, which can double or triple the market value at MS65+ grades. Look specifically at the center band grouping — this is where bridging most often occurs on strike-weak examples.

🔎 CoinHix helps you match your 1975 dime's surfaces and strike quality against graded reference examples on your phone — a coin identifier and value app.

Where to Sell Your Valuable 1975 Dime

The right venue depends on the coin's rarity. A common circulated dime belongs in a coin jar; a potential No-S Proof belongs at a major auction house. Here's how to match your coin to the right market.

🏛️ Heritage Auctions

Best for: MS67+ Full Bands coins, RPM FS-501 varieties, or any No-S Proof discovery. Heritage reaches tens of thousands of active bidders. Their numismatic department specialists handle attribution and pre-sale marketing. Minimum lot values typically around $500–$1,000 for consideration, but rare modern coins routinely exceed those thresholds.

🛒 eBay / Online Marketplaces

Best for: mid-grade uncirculated examples, Full Bands coins in MS65–MS66, and attributed error coins. Check recently sold prices and completed 1975 dime listings before listing to price accurately. Certified PCGS or NGC slabs sell faster and at higher prices than raw coins. Use auction-style listing for rare varieties to let the market determine price.

🏪 Local Coin Shop

Best for: circulated examples, unsorted rolls, or mid-grade uncirculated coins you want to convert to cash quickly. Expect wholesale prices (50–70% of retail) because dealers need profit margin. Bring any coins you believe are errors or high-grade specimens to a coin show specialist rather than a general dealer for better attribution and pricing.

💬 Reddit r/Coins4Sale

Best for: collector-to-collector sales of mid-value coins in the $20–$500 range. The community is knowledgeable and prices typically land between wholesale and retail. Post clear photos including both sides and the edge for error coins. Read community rules carefully before listing — authentication discussions can help validate your coin's variety attribution.

💡 Get it graded first — especially for anything unusual. A raw (ungraded) 1975-P MS67 Full Bands dime might sell for $50 on eBay. The same coin in a PCGS MS67FB holder regularly brings $200–$500. PCGS and NGC grading fees typically run $30–$65 per coin, making grading economically worthwhile for any coin you believe grades MS66 or better, carries a strong error, or is a potential variety. For a suspected No-S Proof, grading is mandatory before sale — the market won't recognize it without certification.

Frequently Asked Questions — 1975 Dime Value

How much is a 1975 dime worth?

Most circulated 1975 Roosevelt dimes are worth face value — just 10 cents. Uncirculated examples (MS65) from Philadelphia reach around $28, while the Full Bands designation roughly doubles that to about $60. At the extreme top end, the ultra-rare 1975 No-S Proof dime — only two known — sold for $506,250 at GreatCollections in October 2024, the highest price ever paid for a modern U.S. coin.

What makes the 1975 No-S Proof dime so valuable?

The 1975 No-S Proof dime is extraordinary because only two examples are known to exist. The San Francisco Mint accidentally used an obverse die that had not been punched with the "S" mint mark, releasing proof coins without the identifying mark. Once the error was discovered, the affected coins were destroyed — but at least two escaped into proof sets sold to the public. It is ranked #1 in 100 Greatest U.S. Modern Coins by Garrett and Schechter.

What is the Full Bands (FB) designation and why does it matter?

Full Bands (FB) — also called Full Torch Bands — means the horizontal bands crossing the torch on the reverse of the dime are fully separated with no bridging metal between them. This designation indicates a superior-quality strike. On a 1975-P dime, MS65 without Full Bands is worth around $28, while MS65 with Full Bands climbs to roughly $60. At MS67, the Full Bands premium is even more dramatic, with examples realizing $2,000+.

How do I tell a 1975-P dime from a 1975-D dime?

Look just above the date on the obverse (front) of the coin. A "D" mint mark indicates Denver production; a coin with no mint mark was struck at Philadelphia. The Philadelphia Mint did not add the "P" mint mark to dimes until 1980, so all 1975 Philadelphia dimes are plain with no letter above the date. San Francisco-struck proof coins carry an "S" mint mark, but these have distinctive mirror-like proof surfaces that make them easy to identify even without a loupe.

What is the 1975-S/S RPM FS-501 dime?

The 1975-S/S Repunched Mint Mark FS-501 is a proof coin variety where workers at the San Francisco Mint punched the "S" mint mark twice at slightly different angles during hand-punching of working dies. Under a loupe or magnifier, you can see overlapping "S" impressions. Catalogued as FS-501 by CONECA, top examples in PR69 have sold for around $881 at Heritage Auctions, making this a notable collector variety.

Are 1975 dimes rare?

Standard 1975 dimes are not rare at all — Philadelphia struck nearly 586 million and Denver produced over 313 million. These circulated coins turn up in pocket change regularly. What makes certain 1975 dimes rare is condition combined with strike quality. MS67+ Full Bands coins from Philadelphia are genuinely scarce. The 1975 No-S Proof is among the rarest U.S. coins of any era, with only two confirmed examples in existence.

What year Roosevelt dime has the most value?

In terms of a single auction sale, the 1975 No-S Proof Roosevelt dime holds the all-time record at $506,250 (GreatCollections, October 2024). Among regular-issue Roosevelt dimes, certain pre-1965 silver issues and low-mintage examples command strong premiums. For clad-era coins specifically, 1975 No-S stands alone. Regular 1975 business strikes are common; value comes primarily from high grade and Full Bands designation.

How do I check if my 1975-S proof dime is the rare No-S variety?

Look for the "S" mint mark above the date on the obverse. A normal 1975-S proof dime has a clear "S" mark. The No-S variety has absolutely no mint mark at that location — and the coin must also display full proof characteristics: mirror-like reflective fields, frosted raised devices, and sharp squared rims. If you believe you have a No-S proof, do not clean it; submit it directly to PCGS or NGC for authentication, as both known examples are already certified.

What is a 1975 dime doubled die worth?

Doubled die errors on the 1975 Roosevelt dime occur when the working die received a doubled hub impression during manufacture, causing doubling visible on design elements such as the lettering, date, or torch reverse. Values vary significantly depending on the severity and location of the doubling. Minor doubled dies in circulated condition may bring only a small premium, while a strongly doubled example in uncirculated condition could be worth several hundred dollars or more.

Should I get my 1975 dime graded by PCGS or NGC?

Submitting a standard 1975 dime to PCGS or NGC for grading rarely makes economic sense — submission fees typically exceed the coin's value. However, if you have a coin grading MS67+ with Full Bands designation, a suspected No-S Proof, a strongly-doubled die, or another significant error, professional grading is essential. The No-S Proof especially requires PCGS or NGC certification before any sale, as both known examples are already certified and any new discovery would need authentication to establish legitimacy.

Ready to find out what your 1975 dime is worth?

The free calculator takes less than 30 seconds — enter your mint mark, grade, and any errors for an instant market estimate.

Use the Free 1975 Dime Calculator →